Why Refilling a Foam Soap Dispenser Correctly Matters
Foam soap dispensers are common in commercial and home settings because they deliver a pre-foamed dose that reduces waste and mess. But getting the refill right is important—using the wrong product or technique can lead to clogs, weak foam, or even damage to the dispenser mechanism.
This guide explains how to refill a pour-in foam soap dispenser using the correct products and steps. We'll focus on the Foam Soap/Sanitiser Pour in Dispenser 0.9Ltr, which is designed for use with specific foaming soaps and sanitisers.
Product Facts: Foam Soap/Sanitiser Pour in Dispenser 0.9Ltr
- Foam Soap/Sanitiser Pour in Dispenser 0.9Ltr: The dispenser has a 900 ml capacity and is designed for use with Cleenol Foaming Soap (product 7104) and Alcohol-free Hand Sanitiser (product 757/5L). Using these compatible products ensures the dispenser produces proper foam and avoids clogging. Regular liquid soap or thick sanitisers may not work correctly.

Foam Soap/Sanitiser Pour in Dispenser 0.9Ltr - Foam Soap/Sanitiser Pour in Dispenser 0.9Ltr: It is a pour-in dispenser, meaning you refill it by pouring the soap or sanitiser directly into the reservoir. No special tools or cartridges are needed, but you must avoid overfilling and ensure the lid is secure after refilling.
What You Need for a Correct Refill
Before you start, gather the following:
- Compatible soap or sanitiser: Use only Cleenol Foaming Soap (7104) or Alcohol-free Hand Sanitiser (757/5L). Other products may not foam correctly or could damage the dispenser.
- Clean funnel (optional): A funnel helps avoid spills when pouring into the 900 ml reservoir. If you don't have one, pour slowly and carefully.
- Dry cloth: Keep a cloth handy to wipe any drips from the dispenser or countertop.
Step-by-Step Refill Instructions
Follow these steps to refill your Foam Soap/Sanitiser Pour in Dispenser 0.9Ltr correctly.
- Step 1: Remove the dispenser top: Unscrew or lift off the top of the dispenser to access the reservoir. Set the top aside on a clean surface.
- Step 2: Pour the compatible product: Slowly pour the Cleenol Foaming Soap or Alcohol-free Hand Sanitiser into the reservoir. Use a funnel if available. Fill to allow room for the pump mechanism—do not overfill, and follow the product instructions for the correct fill level.
- Step 3: Replace the top securely: Screw or press the top back on firmly. Ensure it is sealed to prevent leaks and to maintain the correct pressure for foaming.
- Step 4: Test the dispenser: Pump the dispenser once or twice to confirm that foam is produced. If no foam appears, check that the top is secure and that you used a compatible product.
- Step 5: Wipe away any spills: Use a dry cloth to clean any product that may have spilled on the outside of the dispenser or the counter. This prevents sticky residue and keeps the unit hygienic.
What to Avoid When Refilling
Do not mix different soaps or sanitisers in the reservoir, as this can affect foam quality and may cause clogs. Avoid using thick, non-foaming hand soaps or gel sanitisers—they are not designed for this dispenser and may damage the pump mechanism.
Also, do not let the dispenser run completely empty before refilling, as air pockets can make it harder to re-prime the pump. Refill when the level is low but still visible.
Maintaining Your Foam Soap Dispenser
To keep your dispenser working well, clean the reservoir periodically. Empty any remaining product, rinse with warm water, and dry thoroughly before refilling. This prevents buildup that can affect foam quality.
The dispenser is designed for commercial use, but these simple care steps will extend its life in any setting. If the pump becomes stiff or stops producing foam, check for clogs and clean the nozzle.


